Free Android app to check configuration maximum of different vSphere versions etc.

vMaxGuide is an Android application (it’s a new free fling application by VMware Labs) which provides the maximum supported configurations of the following vSphere versions:

• vSphere 5.5
• vSphere 5.1
• vSphere 5.1

vSphere 6.0 which doubles many of the numbers, will get added pretty soon I’m sure.

vMaxGuide also provides a comparative view of components across the three versions of vSphere along with the comparison of virtual Hardware versions of Virtual Machines.

Users can swipe between the different platforms displayed and select the component of interest. The app also provides a message to the user on certain components, marked by [*], which requires certain condition to reach the maximum supported configuration.

This app is certainly handy when you need to quickly check which version of vSphere has support for certain amount of RAM, CPUs or Disk size etc..

Get your copy here at VMware Labs website.

Thanks to Selva Muthukumaran and Guruprakash Kashyap for this handy app.... :)

VMware Product Default Username and Passwords

As you build out your vSphere environment, you might run into the same thing that most of us have… WHAT ARE THE DEFAULT USERNAME AND PASSWORDS FOR EACH PRODUCT … Thought it would be very useful to get a full list together on my own blog. Here is a comprehensive list of default username and passwords for most of the VMware products, FreeNAS/OpenFiler, hope this help you. If I left any off, please let me know in the comments…..

• VMware vCenter Server Appliance Default Username and Password

https://IPorDNS_of_Server:5480

username = root

password = vmware

• vCenter Application Discovery Manager Default Username and Password

http://IPorDNS_of_Server

Username: root

Password: 123456

Default ADM management console password is 123456 and the CLI password is ChangeMe.

If you have reset the default CLI password and have forgotten the new password, you must reset it from the Single User Mode, which requires an appliance or host reboot.

•  vCenter Chargeback Default Username and Password

http://IP_or_DNS_name:8080/cbmui/

Username: root

Password: vmware

• vCenter Infrastructure Navigator Default Username and Password

https://IPorDNS_of_Server:5480

username: root

password: Supplied during OVA deployment

• vCenter Log Insight Default Username and Password

https:// log_insight-host/

username: admin

password: password specified during initial configuration

•  vCenter Web Client Configuration Default Username and Password

https://IPorDNS_of_Server:9443/admin-app

username: root

password: vmware

• vCenter vSphere Web Client Access Default Username and Password

https://IPorDNS_of_Server:9443/vsphere-client/

username: root

password: vmware

The vCenter Server Appliance has the following default user names

root with the password vmware.

For vSphere 5.1 = The default Single Sign-On administrator is admin@System-Domain with the password you specified at installation

• vCenter Single Sign On (SSO) Default Username and Password

https://IPorDNS_of_Server:7444/lookupservice/sdk

For vSphere 5.1 = Windows default username: admin@System-Domain

For vSphere 5.1 = Linux (Virtual Appliance) default username: root@System-Domain

password: specified during installation

For vSphere 5.5 = default username: administrator@vsphere.local so administrator@vsphere.local with the password that you entered during installation for the vCenter Single Sign-On administrator account in the built-in domain.

• vCenter Orchestrator Appliance Default Username and Password

http://orchestrator_appliance_ip

Appliance Configuration: Change the root password of the appliance Linux user. Otherwise, the first time when you try to log in to the appliance Web console, you will be prompted to change the password.

Orchestrator Configuration:

http://orchestrator_appliance_ip

username: vmware
password: vmware

• Orchestrator Client Default Username and Password

username: vcoadmin
password: vcoadmin

•  Web Operator Default Username and Password

username: vcoadmin
password: vcoadmin
 

·         vCenter Orchestrator for Windows Default Username and Password

https://(SERVER_IP):8283 or http://(SERVER_IP):8282
username: vmware
password: vmware

WebViews: http://orchestrator_server:8280.

·         vCenter Orchestrator for vCloud Automation Center (built-in):

https://vcloud_automation_center_appliance_ip:8283

username: vmware

password: vmware (after initial logon, this password is changed)

vCO Client is accessible from http://vcloud_automation_center_appliance_ip

username: administrator@vsphere.local  (or the SSO admin username)

password: specified password for the SSO admin during vCAC-Identity deployment

·         vCenter Operations Default Username and Password

Manager: https://IPorDNS_of_UI_Server

Username: admin

Password: admin

Admin: https://IPorDNS_of_UI_Server/admin

Username: admin

Password: admin

CustomUI: https://IPorDNS_of_UI_Server/vcops-custom/

Username: admin

Password: admin

• vCloud Director Web based Login
  https://<ip-address>/cloud/
  username: administrator
  password: specified during wizard setup

• VMware vCloud Director Appliance 5.1.1
  username = root
  password = vmware

• VMware vCloud Director Appliance/Oracle Database 11g R2 XE instance
  username = vcloud
  password = VCloud

• VMware vShield Manager Appliance Default Username and Password
  username = admin
  password = default

• vSphere Management Assistant (vMA) Default Username and Password
  username = vi-admin
  password = <defined during configuration>

• vSphere Data Recovery Appliance Default Username and Password
• username = root
  password = vmw@re

• VMware vCenter Operations Manager Default Username and Password
  username = admin
  password =  admin

·         Horizon Application Manager Default Username and Password

http://IPorDNS/SAAS/login/0

http://IPorDNS

·         Horizon Connector

https://IPorDNS:8443/

·         vCloud Automation Center Identity Appliance Default Username and Password

https://identity-hostname.domain.name:5480/

Username: root

Password: password supplied during appliance deployment

·         vCloud Automation Center vCAC Appliance Default Username and Password

https://identity-hostname.domain.name:5480/

Username: root

Password: password supplied during appliance deployment

·         vCloud Automation Center Default Username and Password

https://vcac-appliance-hostname.domain.name/shell-ui-app

Username: administrator@vsphere.local

Password: SSO password configured during deployment

·         vCloud Automation Center built-in vCenter Orchestrator Default Username and Password:

https://vcloud_automation_center_appliance_ip:8283

Username: vmware

Password: vmware (after initial logon, this password is changed)

vCO Client is accessible from http://vcloud_automation_center_appliance_ip

Username: administrator@vsphere.local (or the SSO admin username)

Password: specified password for the SSO admin during vCAC-Identity deployment

·         vCloud Connector Node Default Username and Password

https://IPorDNS_of_Server:5480

Username: admin

Password: vmware

·         vCloud Connector Server Default Username and Password

https://IPorDNS_of_Server:5480

Username: admin

Password: vmware

·         vCloud Director Default Username and Password

https://IPorDNS_of_Server/cloud/

Username: administrator

Password: specified during wizard setup

·         vCloud Director Appliance Default Username and Password

username: root

password: Default0, vmware (in version 5.1.1)

OracleXEDatabase

Username: vcloud

Password: VCloud

·         vCloud Networking and Security

Console to VM

Username: admin

Password: default

Type "enable"

Password: default

Type "setup" then configures IP settings

http://IPorDNS

• VMware Site Recovery Manager Default Username and Password

Username: This is your vCenter admin username
Password: (this is your vCenter admin password

·         vShield Manager Default Username and Password

Console to VM

Username: admin

Password: default

Type "enable"

Password: default

Type "setup" then configure IP settings

http://IPorDNS_of_Server

•  vCenter Mobile Access (vCMA) Default Username and Password

https://vcenterIP/mob

Username: root
Password: vmware

·         vFabric Application Director Default Username and Password

https://IPorDNS_of_Server:8443/darwin/

root: specified during deployment

Password: specified during deplyent

darwin_user password: specified during deployment

admin: specified during deployment

·         vFabric AppInsight Default Username and Password

http://IPorDNS_of_Server

Username: admin

Password: specified during OVA deployment

·         vFabric Data Director Default Username and Password

https://IPorDNS_of_Server/datadirector

Username: created during wizard

Password: created during wizard

·         vFabric Hyperic vApp Default Username and Password

Username: root

Password: hqadmin

·         View Admin

https://IPorDNS_of_Server/admin

Username: windows credentials

Password: windows credentials

·         vSphere Data Protection Appliance Default Username and Password

https://<IP_address_VDP_Appliance>:8543/vdp-configure/

Username: root

Password: changeme

·         vSphere Replication Appliance Default Username and Password

https://vr-appliance-address:5480

Username: root

Password: You configured the root password during the OVF deployment of the vSphere Replication appliance

Open Filer Default Username and Password:  https://IPorDNS_of_Server:446

To login to the Openfiler web based management interface you use the following credentials:

Default username: openfiler

​Default password: password

FreeNas Default Username and Password: http or https://IPorDNS_of_Server

The default username is admin and the default password is freenas.

That's it........

 If I left any off, please let me know in the comments…..Thank you!

VMware Certification Roadmap for 2015 (VMware vSphere 6.0)

VMware Certification Roadmap for VMware vSphere 6.0 : The VMware Certified Advanced Professional (VCAP) is no more there. Now, the two exams – Admin and Design (VCAP-DCV and VCAP-DCD) – are being combined into one certification, the VMware Certified Implementation Expert (VCIX)….....

VCIX certification is comprised of two separate exams- one focused on Administration and one focused on design.

VCIX = VCIX design exam + VCIX Administration exam , Yes ofcourse VCP is a pre-req ;)

Checkout VMware Mylearn for more info....or take a look here at WAHL NETWORK Blog.

That's it....

How to Fix Windows 7 Temp Profile Issue

If you are facing this problen where every time when you try to login as the domain account, it creates a temp profile. To fix this issue...
First restart your system 2-3 times and if that doesn't fix your problem then try this,

Open Registry editer (by typing run -> regedit) and delete the offending profile registry key from below listed registry location,

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\

Here for the victim profile you will see similar keys under profile list, but one with .bak, The key with .bak is for the correct old profile. So, remove the new profile key ( which is not having.bak) and remove .bak from correct profile key.
Now log off and re-login with your user name and password (or restart the system once).

That’s it... :)

Shortcut Keys that works with Remote Desktop

The following is a list of the Remote Desktop Services shortcut keys.
Shortcut key Description.....
ALT+PAGE UP Switches between programs from left to right.
ALT+PAGE DOWN Switches between programs for right to left.
ALT+INSERT Cycles through the programs in the order they were started.
ALT+HOME Displays the Start menu. CTRL+ALT+BREAK Switches the client between full-screen mode and window mode.
CTRL+ALT+END Brings up the Windows Security dialog box.
ALT+DELETE Displays the Windows menu.
CTRL+ALT+MINUS SIGN (-) Places a snapshot of the active window, within the client, on the Remote Desktop Session Host (RD Session Host) server clipboard (provides the same functionality as pressing ALT+PRINT SCREEN on the local computer).
CTRL+ALT+PLUS SIGN (+) Places a snapshot of the entire client windows area on the RD Session Host server clipboard (provides the same functionality as pressing PRINT SCREEN on the local computer).

Change Local or domain user Password from the Command Prompt

One can change Local User / domain user Password from the Command Prompt by using 'net user' command. This is very usefull specially when you work on remote machines and access RDP within RDP(where ALT+CTRL+END doesn't work) and want to change you domain user password. In my case I wanted to change my domain user pwd on a Server 2008 remote machine, where Alt+Ctrl+End or Del is the only way to change your pwd(i couldn't find any other :P ).

To change a user's password at the command prompt, one should have administrator or required rights.

Syntx:- C:\Users\nMohammad>net user nMohammad * /domain

When you are prompted to type a password for the user, type the new password, not the existing password. After you type the new password, the system prompts you to retype the password to confirm. The password is now changed.

Alternatively, you can type the following command:
C:\Users\nMohammad>net user nMohammad asd#123 /domain, where "asd#123" is a new password.
When you do so, the password changes without prompting you again.

To change password of a administrator or local user account do this,

C:\Users\nMohammad>net user nMohammad asd#1234,  where "asd#123" is a new password.

Note:- In case if you don't have sufficient privilage, when attempt to change the password you will get a "Access is denied" error message.

How to import cached contacts from an .nk2 file into Outlook 2010

Unlike Outlook 2003/2007, Outlook 2010 no longer uses .NK2 files to cache email addresses for its AutoSuggest/AutoComplete feature. Instead, it now stores these addresses in a Suggested Contacts folder.


When you upgrade to Outlook 2010, the .NK2 file is automatically imported when you start Outlook 2010 for the first time.

However, when you will use a new computer, or create a new mail profile, you can import the .NK2 file this way:

Copy your current .NK2 file from the following folder:

 Windows 7

C:\Users\%username%\AppData\Roaming\Microsoft\Outlook

Windows XP

C:\Documents and Settings\%username%\Application Settings\Microsoft\Outlook

Now Re-copy this same file into same folder in your new computer or new mail profile.

Rename the .NK2 file to the name of your mail profile. Your default mail profile name is “outlook”, so if this is the case, you will rename this file to “outlook.nk2”.

(To check the name of your mail profile, go to Control Panel -> Mail -> Show Profiles).

Start Outlook 2010 with the /importnk2 switch by doing the following:

Windows 7

On the Start menu search box, type outlook.exe /importnk2

Windows XP

On the Start menu, click Run, then type outlook.exe /importnk2,

This cmd will import contacts from old version's .nk2 file to Outlook 2010 suggested contacts folder. 
Thats it....Now Outlook will show you contact suggestions..... enjoy :)

Remove custom views from all Outlook folders at once

Today when I was checking my mails, outlook got crashed and when I reopen it, its mail view was different for many folders. To reset mail view to default you may use below listed cmd......

Windows XP


Start-> Run: outlook.exe /cleanviews

Windows Vista and Windows 7

Start-> type: outlook.exe /cleanviews

Windows 8

Start Screen-> type: outlook.exe /cleanviews

Note: There is a space between outlook.exe and /cleanviews.